Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.     

聚能射流形成过程的理论建模与分析

分析了聚能射流的形成过程,并对其中的各阶段进行了详细建模。在模型中考虑了炸药爆轰、金属的驱动、药型罩压垮以及射流和杵体的形成过程。采用该模型对某一聚能装药结构进行了计算,计算结果表明:药型罩顶部和底部微元的压垮速度较小,在射流头部形成反向速度梯度,与试验数据吻合较好。该模型对于多级侵彻战斗部的工程设计与侵彻参数的计算具有一定的参考价值。     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

直接力/气动力复合作用动能拦截弹姿态控制方法

针对直接力/气动力复合作用动能拦截弹的姿态控制问题,建立了拦截弹俯仰-偏航通道短周期运动模型;利用线性二次型最优跟踪控制理论结合姿控固体小火箭点火逻辑设计了复合控制系统,通过分析非线性容限得出了该系统对直接力偏差具有强鲁棒性的结论;姿控回路仿真表明系统具有快速响应特性及良好的跟踪性能,考虑侧喷干扰效应等实际条件的六自由度弹道仿真表明所设计的控制系统能够满足拦截末段直接碰撞要求。     

合成射流影响因素

在综合国外大量实验和数值模拟数据的基础上 ,对影响合成射流特性的驱动因素、结构因素进行了分析和总结 ,并且通过数值模拟的方法对雷诺数以及斯托罗哈数对合成射流的影响进行了研究。获得了反映合成射流激励器特征的函数关系式 ,为激励器的初步设计提供指导     

超燃冲压发动机燃烧室燃料喷注及其内流场的数值模拟

基于三维N-S方程,利用有限差分数值离散方法,对考虑了燃料喷注和凹腔结构综合影响的某超燃冲压发动机燃烧室模型的内流场进行了数值模拟,与实验流动图谱进行了定性比较,并进一步探讨了燃料喷注过程的非定常特性以及凹腔结构对流动的影响。研究表明:本文数值模拟的稳态时刻流场与实验流动图谱相似;数值结果捕捉到了横向喷注燃料沿下游运动并向凹腔扩散的非定常动态变化的规律。     

助推器分离过程动态流场数值模拟

利用三维N-S方程,采用NND2M有限差分格式作为数值离散方法,对助推器与上面级分离过程的动态流场进行了数值模拟,分析了反作用推力火箭发动机的喷流对上面级弹体底部轴向作用力的影响。根据计算得到的变化规律发现,在分离距离较小的情况下,反推火箭喷流对上面级弹体的干扰作用明显,产生较大轴向作用力,对于上面级飞行稳定性有影响。     

新型优化同心筒自力发射流场机理与降温效果

针对同心筒自力发射结构优化与热环境改善的问题,基于雷诺平均方程及轴对称N-S方程,依托弹性变形和网格再生成方法结合的动网格技术,对3种不同结构形式同心筒发射装置的二维轴对称流场进行了非定常数值计算,得到了不同结构条件下动态的流场机理及导弹热环境特性。计算结果显示:导流器方案能实现燃气流迅速顺利排导;筒底收缩段设计能有效遮挡反溅燃气流;筒口导流板结构较好抑制了内筒的"倒吸效应",确保导弹和内筒的热安全;揭示了优化同心筒的流场结构与降温机理,可为相关研究提供参考。     

不同形状喷嘴内流场模拟分析

建立了前混合磨料水射流喷嘴内固液两相流动的数学模型,运用Fluent软件对圆柱型、圆锥收敛型、流线型和圆锥带圆柱段收敛型喷嘴内流场进行了数值模拟,分析了喷嘴形状对喷嘴内流场和磨料颗粒加速性能的影响,并通过切割实验验证了仿真结果的可靠性。结果表明:圆柱型喷嘴能量损耗较大,圆锥收敛型喷嘴对磨料颗粒的加速性能差,流线型喷嘴性能良好但不易加工,只有圆锥带圆柱段收敛型喷嘴是用作前混合式磨料水射流喷嘴的最优选择。     

Numerical simulation of base flow with hot base bleed for two jet models

In order to improve the benefits of base bleed in base flow field, the base flow with hot base bleed for two jet models is studied. Two-dimensional axisymmetric Navier–Stokes equations are computed by using a finite volume scheme. The base flow of a cylinder afterbody with base bleed is simulated. The simulation results are validated with the experimental data, and the experimental results are well reproduced. On this basis, the base flow fields with base bleed for a circular jet model and an annulus jet model are investigated by selecting the injection temperature from 830 K to 2200 K. The results show that the base pressure of the annular jet model is higher than that of the circular jet model with the changes of the injection parameter and the injection temperature. For the circular jet model, the hot gases are concentrated in the vicinity of the base. For the annular jet model, the bleed gases flow into the shear layer directly so that the hot gases are concentrated in the shear layer. The latter temperature distribution is better for the increase of base pressure.